«

»

Sep 18

vRealize Automation 6.1 – Install Guide Part 2

In this multi-part series we will deploy the Identity Appliance, the vCAC Appliance, the Windows IaaS components, ITBM standard, Application Services, and then do a basic tenant setup.

Notice this deployment is not going to be production ready but will give you hands on pretty quickly.

In Part 2 we go through the basic build out of the vCAC Appliance. If you haven’t yet please walk through the configuration of your Identity Appliance in Part 1.

Now let’s step through the deployment of the OVF or OVA.
02 deploy ovf

Browse to the location of your OVF or OVA.
03 ova

Review details.
04 review

Review the EULA and accept.
05 eula

Name your virtual machine (I choose the fqdn for my deployment).
06 name

Select disk location and type.
07 datastore

Select the network you plan to deploy the virtual appliance to, *Notice this needs to be available from the SSO and IaaS components.
08 network

Enter the settings for your virtual machine

  • Enter and confirm the root password
  • Select if you wish to enable SSH
  • Set your hostname – USE FQDN!!!
  • Set your default gateway
  • Set your DNS servers
  • Set your network IP address
  • Set your netmask

09 settings 1
10 settings 2

Check power on and click finish. This process will take a few moments depending on your storage and network configuration
11 power on and finish

Now launch a web browser go to https://fqdn:5480 in my example I used https://vcac-va-ng.biteback.records:5480
Login with root and the password you just defined.
12 root login

In the System tab go to Time Zone and set it to your local time zone.
13 tz

In the Admin tab under Time Settings define your ntp servers and save settings. I HIGHLY recommend not using host time because if the host time drifts there’s no warning and it will create issues with the vCAC components.
14 ntp

In the vCAC Settings tab you will Resolve Host Name and save settings if it populates correctly. If not you will need to review your DNS configuration!
15 vcac settings

In the vCAC Settings tab under SSL you will generate a new certificate.
16 ssl

Once complete you the SSL setting it give you see the SSL Certificate is replaced successfully.
17 ssl complete

In the vCAC Settings tab under SSO you will fill out the details from the Identity Appliance

  • Enter the FQDN hostname of your SSO or Identity Appliance and append the :7444 port number
  • Default Tenant cannot be changed
  • administrator@vsphere.local
  • Set the admin password you defined when configuring the Identity Appliance

18 sso

Verify the certificate when prompted
19 sso ssl verify

This process will take some time to complete as it is configuring all of the SSO details. Once complete you will see the configuration is updated successfully.
20 sso complete

In the vCAC Settings tab under Licensing you will want to wait till it returns No valid licenses. Then you can enter your license key.
21 license

Once validated you will see the details of the license key
22 license validated

Now we will navigate to the default tenant configuration page so we can verify everything has been setup prior to moving on to the windows component installs. My url is https://vcac-va-ng.biteback.records/vcac
23 url

Login with your administrator@vsphere.local
24 login

Assuming everything worked as expected you will see this as the result of your login.
25 default tenant success

Now that you have configured the virtual appliances the next step in Part 3 will be to build the windows components.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>